I have a 2007 450 with the factory 2" spacers. I want to bring the rear wheels back closer to the original, pre-spacer, track width. I have looked at the spacers and it is not as easy as unbolting them because the original stud holes appear to have been drilled out to bolt in the spacers.
The question is: Is there an offset that will bring the rear wheels back in line with the front or close to it? I was thinking about going to front wheels (9") all the way around anyway but these would still stick out farther than the fronts if they are the same offset.
The question is: Is there an offset that will bring the rear wheels back in line with the front or close to it? I was thinking about going to front wheels (9") all the way around anyway but these would still stick out farther than the fronts if they are the same offset.