I have had 3 Modules that failed. After having them replaced one after another, I decided to do some research. I took them all apart to analyzed the issues. This is what I found. (Attached Photos) The coil is not secured to the lower circuit board. Vibrations would eventually break the Coil from the circuit board. The coil is just sustained in the air. After I repaired all three modules with the exact issues, I secured the coil down with hot glue. So far I have had no issues with the module going out. The code that I was getting when it failed, was 1-2 and 4-5. I hope that Wicked Bilt will get to the bottom of this and fix this problems for All! Right now its just a Temporarly fix, until then, I , we, Should get new re-designed Modules. I hope that Wicked bilt, look into this and take care of this issues. Poor designed. I did forward all my photos to Wicked Bilt with what Ive found.
↧