After spending way to much on plexi glass windshields that always scratched, rattled and never lasted I decided to fabricate a laminated safety glass windshield with an aluminum frame that fit tight, looked great and that would last. After I put it on and my riding and hunting buddy's seen it they all wanted me to fab one for them. Since then I have fabricated over 50 of these and a friend of mine who is also a member of this forum suggested I should ask all of you what you think and offer them to you. I have 3 styles I have fabricated 1 with the glass that sits in a z metal frame that bolts to the aluminum roll bar frame which the glass can be removed if needed like on hot days by just unbolting it. I have also one that the windshield pops out 2" or 4" that hinges at the top so you can get air flow when needed. I also have put vents in the roll bar frame to get air flow in the fixed style. I have also fabricated the roof and back panel that match the windshield. I have been thinking about setting up and marketing these but really wanted to see what the interest and demand might be before I jump in all the way . Please take a look at the pictures I posted and if you have any questions or might be interested please give me a call @ 435-990-1012.
↧